Steering Stabilizer for 1-1/8" Handlebars. With mounting kit for KTM and Husqvarna 2016-2022 with billet triple clamps that have anti-vibe rubber cones. If you are running stock handlebar clamps we will provide you with aluminum cones that have viton rubber to reduce vibration and offer rigidity. This Damper mounts to the handlebar between the two handlebar clamps. If your handlebar clamps are connected on top or bottom you will need to cut them or purchase separate pieces from this site or the bike manufacturer. You do not need the clamps connected with our aluminum cones.
Improved traction out of corners by keeping the rear end compliant
Does not mount in a dangerous position over the bars to cause injury to your chest or chin
Does not raise your handlebars at all in most applications Can be used with: Stock, Shock & Vibe, BRP, and PHDS clamps in multiple positions
Can be used with standard handlebars or Flexx Bars, no razed crossbar needed
Allows you to run a bar pad for your protection and still adjust the damper with it on
Fully greased and sealed linkage (no lubricating with dirt) wear adjustable linkage to ensure there is no slop in the steering
This damper is used by Factory KTM and Factory Husqvarna racers. It has 20 low speed adjustments with detente clicks and 12 high speed adjustments with lobe clicks. The linkage is greased and sealed for long life and is adjustable for wear. The unit as shown weighs 1.2 Lb (544 grams)